Keeping your garage floor clean can feel like an endless chore. But when you’ve invested in a professional polyaspartic coating, maintaining that smooth, pristine finish is important. Unlike boring old concrete, polyaspartic floors add some serious style and luxury to your garage space. The slick glossy look just makes you want to take care of it.
Luckily, with the right tools and techniques, keeping a polyaspartic floor sparkling is totally doable. You don’t need to be a professional cleaner to make your floor shine like new. All it takes is a little routine maintenance and elbow grease.
So, continue reading as this article walks you through the steps to safely and effectively clean your polyaspartic garage floor.
.
Supplies Needed
Before getting started, you will need to gather the appropriate supplies:
- Broom or leaf blower – to remove loose dirt and debris
- pH neutral cleaner – for washing the floor
- Mop and bucket
- Scrub brush – for tougher stains
- Squeegee – to remove excess water
Steps to cleaning your polyaspartic garage floor
Sweep Away Loose Debris
The first step is to sweep your garage floor thoroughly. This removes any loose dirt, leaves, sand, or other debris sitting on the surface. For larger garage spaces, a leaf blower can help quickly clear away particles.
Make sure to get into corners and crevices. And pay close attention near vehicle parking spots or in front of garage doors where debris tends to accumulate..
Mix pH Neutral Cleaner
Polyaspartic floors require pH-neutral cleaners. And not harsh chemicals that can damage the floor’s protective coating. So, mix up a solution of pH neutral cleaner and water based on the manufacturer’s recommendations.
Only make enough for the area you plan to clean in one session. Don’t leave the mixture sitting for prolonged periods.
Wash Surface with Mop
Dip your mop into the cleaner solution and mop the floor in sections. Work from the furthest corner back towards the garage door. This avoids stepping on areas that have just been cleaned.
Mop using a gentle swirling motion to lift up dirt. Take care not to scrub aggressively as this can lead to swirl marks on the floor’s finish.
Use Scrub Brush on Stains
For tougher spots like oil, grease or tire marks, use a soft bristle scrub brush. Carefully scrub back and forth to lift the stain without damaging the floor. Avoid applying too much downward pressure.
Rinse the brush in your cleaning bucket frequently to prevent spreading the stain. Continue mopping with cleaner to remove any residual marks.
Rinse Floor Thoroughly
Once the entire floor has been washed, rinse thoroughly with clean water. Change out the water in your bucket frequently to ensure soap residue is not left behind.
Use your mop to absorb as much water as possible. Pay special attention to grout lines and textured areas which can trap water.
Squeegee Remaining Moisture
For smoother garage floor finishes, use a squeegee to wick away leftover moisture. Wipe in straight lines from top to bottom. Overlap passes slightly to grab all remaining water.
You can place absorbent towels under garage doors and wipe moisture towards them to prevent water from pooling.
Allow Floor to Dry
After squeegeeing, allow your polyaspartic garage floor to air dry completely. This may take several hours. Avoid walking on the wet floor until fully dry to prevent slip hazards or smudges.
Circulating fans or portable heaters can help speed up the drying process. But take precautions against blowing loose debris around while the floor is still tacky.
Conclusion
There you have it – we hope this guide saves you some trouble keeping your polyaspartic garage floor spotless. Trust me, taking a little time each month to sweep, wash, scrub, and dry the floor pays off. It’s much easier than letting oil stains and tire marks build up until you need heavy-duty cleaning.