Keeping floors clean is no easy feat, that’s for sure. But with Mannington Adura Rigid floors, it doesn’t have to be such a dreadful task. Keeping these floors looking fresh and new may seem daunting at first glance, but there’s no need to fear – this article is here to show readers the ropes.
It’s a common scenario. Life gets busy, messes happen, and dust bunnies multiply.And before you know it, floors are looking worse for wear. It’s understandable, it really is. But let this article serve as a guide to making those floors shine again.
With just a few simple cleaning steps and products readily available at home or the store, anyone can have their Mannington Adura Rigid floors looking model home ready in no time.
The article will walk through tried and true methods step-by-step so readers can care for floors like a pro. No need to hire costly cleaners or replace floors prematurely. Just grab a mop, and let’s get to it!
5 Steps To Cleaning Mannington Adura Rigid
Step 1: Vacuum
- The first step is to thoroughly vacuum your Adura Rigid floors. This will remove any loose dirt, dust, pet hair, and other debris.
- Use a vacuum specifically designed for hard floors, not carpets. The bristles could scratch the floor’s surface.
- Vacuum in multiple directions – forward and back, side to side, and diagonally. Make sure to get along edges, in corners, and under furniture.
- Pay close attention to high traffic areas that collect more dirt. Empty the vacuum frequently to optimize suction power.
- Regular vacuuming prevents dirt buildup and extends the time between deep cleanings.
- Aim to vacuum daily or at least a few times per week. Your Mannington floors will stay cleaner longer.
Step 2: Damp Mop
- After vacuuming up dry soil, it’s time to mop up any remaining dirt and grime.
- For Mannington Adura, it’s best to use a microfiber mop pad slightly dampened with water.
- Avoid excessive moisture that could seep into seams and damage the plank connections.
- Before mopping, sweep or vacuum again to pick up any debris that could scratch during mopping.
- Then, liberally mist your mop pad with water. Avoid using detergents or cleaners, as they can leave cloudy residue.
- Mop in sections using a figure-8 motion. Rinse and re-wet the pad frequently to prevent spreading dirt around.
- Work your way out of the room to avoid stepping on damp floors. Let the floors air dry completely before walking on them.
- For tougher dirt, use a pH-neutral cleaner approved for vinyl flooring.
- Rinse thoroughly with clean water to prevent buildup.
Step 3: Remove Stains
Accidents happen, so you’ll inevitably need to remove stains from your Adura Rigid flooring. The key is to act quickly before they have a chance to set in.
- For food, grease, or oil stains, immediately sprinkle some baking soda on the spot.
- Gently rub it in with a damp cloth, then let sit for a few minutes. The baking soda will absorb and lift the stain.
- Wipe clean with water and allow to dry.
- For tougher stains like permanent marker or scuffs, gently rub the spot with a non-abrasive scrubbing pad and vinyl floor cleaner.
- Avoid harsh scrubbing that could damage the floor.
- Be very careful with standing water, which can seep into seams and lift planks.
- Blot up immediately and fan dry the area.
- Avoid walking on damp floors which can also displace tiles.
Step 4: Disinfect
In addition to dirt, bacteria and viruses can also accumulate on your floors. That’s where disinfecting comes in.
- For regular disinfection, add 1/4 cup of bleach to 1 gallon of water.
- Liberally mop over the floor using this solution. Allow to air dry completely.
- For more targeted disinfecting, spray vinyl-safe antibacterial cleaner directly onto problem areas.
- Let sit briefly, then wipe clean with a dry cloth. This kills germs in high traffic zones.
- Bleach solutions are very effective disinfectants for Adura Rigid.
- Just be sure to rinse thoroughly and air dry to prevent damage. Never mix bleach with other cleaners.
- Proper disinfection protects your family’s health by eliminating microscopic germs.
- Disinfect high touch areas weekly or more often when illness occurs.
Step 5: Dry and Reseal
- Once the floors are fully clean, there are a few finishing touches.
- Go over the floors with dry microfiber mop pads or towels to soak up any remaining moisture.
- Extended dampness can warp planks over time.
- Inspect for any scuffs or scratches.
- Use a vinyl floor scratch kit to smooth out minor imperfections. This prevents further damage.
- Finally, reseal the floors every 1-2 years to renew the protective finish.
- Apply 2-3 thin coats of Mannington Award Series urethane with a microfiber applicator. Avoid flooding the surface.
- Proper drying and resealing ensure your Mannington Adura Rigid floors stay beautiful for years to come.
- The floors will repel dirt better and be easier to clean.
Conclusion
Cleaning Mannington Adura Rigid luxury vinyl floors requires a careful, step-by-step approach. By following the above methods, you can keep them looking like new. And with proper everyday care and deep cleaning when necessary, your Adura Rigid floors will stay beautiful for a lifetime. They’ll also better withstand heavy foot traffic with routine maintenance.
So be diligent, but don’t be intimidated. With these simple techniques, you can easily clean your Mannington floors like a pro!
